Skip to content

100% free for you · No obligation
Your need in one click

Kelki targets the best

GoogleTrustpilot

Kelki targets the best

GoogleTrustpilot

290,000+companies in our trades in IrelandYour request goes to the geotechnical engineers in your area.
€0for you, 100% freeKelki is funded by the professionals. No obligation.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Geotechnical Engineer nearby

A geotechnical engineer near you to assess ground conditions and design secure foundations.

A geotechnical engineer assesses the composition and bearing capacity of the ground to safeguard building works near you. These ground specialists identify subsoil strata, groundwater levels, and potential voids or hazards. Their detailed findings help avoid differential settlement, slope instability, and structural cracking in later years. The ground report directly guides the design and depth of suitable foundations for your residential or commercial project.

The process begins with a desk study of local geological records and historical mapping. A ground specialist then brings a drilling rig onto your site in your area to carry out window sampling, trial pitting, or in situ soil testing. Soil samples are frequently sent to a laboratory to determine their geotechnical strength. Finally, the specialist delivers a formal ground investigation report outlining clear recommendations for foundation engineering.

Your areaEverywhere in IrelandYour request goes to the geotechnical engineers around you.
Your request · Geotechnical Engineer

Which service do you need?

Free · No obligation

Geotechnical services

On a building plot, an engineer kneels to examine a soil sample taken with a hand auger
Common service

Preliminary Geotechnical Report

A preliminary geotechnical report provides an initial desk study and walkover assessment before land purchase or development. It flags key ground hazards such as shrink‑swell clay, slope instability, or historic mining. This early overview outlines fundamental site risks ahead of detailed ground investigation works needed for structural engineering.

Free · No obligation
A ground specialist handling core sampling equipment near a drill rig on a residential building plot
Common service

Geotechnical Design Report

A geotechnical design report establishes specific ground recommendations for proposed structural loads and layouts. Based on deep boreholes and in situ testing across the building footprint, it provides bearing capacities and settlement forecasts. Structural engineers, local authority building control, and home warranty providers rely on this document before construction starts.

Free · No obligation
A technician monitoring the penetration depth of a dynamic cone penetrometer outside a modern house
Common service

Dynamic Cone Penetrometer Test

A dynamic cone penetrometer test measures the mechanical resistance and compaction of underlying soil strata in situ. The technician drives a steel cone into the ground using calibrated hammer blows, recording penetration rates. This testing identifies dense bearing layers and pinpoints weak, compressible subsoils beneath future foundations.

Free · No obligation
Crouched near a water-filled test pit, a technician measures the absorption rate for a soil percolation test
Common service

Percolation Test

A percolation test assesses how quickly water drains away into the underlying soil. The specialist digs a trial hole, saturates the subsoil, and measures the fall in water level over time according to standard procedures. The resulting infiltration rate informs soakaway design, sustainable drainage systems (SuDS), or off‑mains septic tank drainage fields.

Free · No obligation
A specialist inspecting a crack on an exterior brick wall with a measuring gauge beside a homeowner
Common service

Foundation Crack Investigation

A foundation crack investigation determines the subsoil factors behind visible movement or damage in an existing property. The specialist inspects structural cracking, examines trial pits to expose footings, and takes soil samples to check for clay shrinkage or tree root action. This analysis diagnoses ground movement and guides any necessary underpinning or remedial works.

Free · No obligation
In a design office, an engineer calculating strip foundation widths over architectural drawings
Common service

Shallow Foundation Design

Shallow foundation design determines the required width, depth, and reinforcement for strip footings, pad foundations, or raft slabs. The geotechnical engineer calculates ground bearing capacity against the structure's anticipated loads. This engineering step prevents uneven settlement while keeping concrete specifications cost‑effective and proportionate.

Free · No obligation
In an excavated trench, a geotechnical specialist assesses soil layers for off-mains wastewater drainage
Common service

Wastewater Treatment System Design

A wastewater treatment system design establishes the right off‑mains package plant or septic tank arrangement for an unsewered plot. The engineer checks soil percolation, seasonal water tables, and site topography. The technical report ensures the proposed soakaway meets Irish building regulations and EPA guidelines for domestic wastewater discharge.

Free · No obligation
At the base of an existing brick wall, a technician measures footing depth prior to extension works
Common service

Extension Geotechnical Report

An extension geotechnical report checks ground compatibility between an existing house and a planned addition. It ensures new footings match local subsoil conditions without undermining or placing uneven weight against existing walls. This ground review prevents differential settlement and hairline cracking along structural junctions.

Free · No obligation
A geotechnical engineer in safety gear holding a soil sample and tablet beside a drilling rig on a building plot

When to call a geotechnical engineer

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose a geotechnical engineer

When choosing a geotechnical engineer, always ask for a clear written proposal detailing their scope of work.

  • The quote or estimate should specify the number of boreholes or trial pits, planned depths, and scheduled laboratory tests.
  • Check that the pro holds professional indemnity insurance appropriate for ground investigation and civil design.
  • Discuss site access early on: restricted driveways or narrow garden gates dictate whether compact tracked rigs or hand equipment are needed.
  • Be cautious of low‑cost desk studies that offer design figures without any ground sampling.
  • Generic mapping records cannot replace intrusive investigation directly on your plot.
  • Ask the pro how their reporting and soil testing align with standard industry methods and Irish building standards.

What makes the price of a geotechnical engineer

The total amount to pay depends primarily on the factors below. The exact figure is established by the pro in a written quote or estimate based on your site details.

What affects the price

  • Building footprint area and structural height
  • Plot accessibility for drilling rigs and machinery
  • Scope and stage of geotechnical assessment required
  • Number, method, and target depth of exploratory holes

Get a call back from a geotechnical engineer

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your request100% free
TradeGeotechnical EngineerLocationEverywhere in IrelandServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · 100% free for you

Your most common questions

How do I find a geotechnical engineer near you?

Outline your project scope, Eircode or site address, and any access limits on Kelki to receive a call back from a local pro. You can also ask an architect or structural engineer for recommendations, read online reviews, and compare written quotes or estimates detailing the proposed borehole depths and laboratory testing.

Do geotechnical engineers cover surrounding areas outside your area?

Yes, site investigation firms use mobile drilling rigs and vans that travel widely across neighbouring areas. Field crews transport sampling equipment directly to the plot. Mobilisation and travel charges are typically incorporated within the overall total price provided in your written quotation.

What is the difference between an initial ground assessment and a design investigation?

An initial assessment is a preliminary desk study and site walkover, often commissioned by land buyers to detect broad geohazards and planning constraints. A full design investigation involves physical drilling across the actual building footprint, calculating precise ground capacities for your structural engineer.

Is a geotechnical investigation mandatory when building a house in Ireland?

Building control requirements, warranty providers, and structural engineers routinely require proof of adequate ground bearing capacity before signing off on foundations. While straightforward ground might sometimes be evaluated directly during footing excavations, complex subsoils, soft ground, or sloping sites make a formal ground report essential.

How long does ground testing take on site?

On‑site testing for a typical residential plot generally takes from a few hours to a full working day. The exact time depends on the number of probe points, borehole depths, and rock hardness. The engineer then analyses soil samples and produces the comprehensive written engineering report over the following weeks.

How should I prepare my site before the investigation team arrives?

Ensure clear, unrestricted access for tracked rigs or support vans through gates and fences. Provide proposed site layouts showing the exact building footprint along with plans of existing underground utilities. Clearly mark out any known buried drainage, gas pipes, or electricity cables to maintain site safety during drilling.

What documentation should I check before commissioning work?

Request confirmation of valid professional indemnity and public liability insurance covering geotechnical investigations. You can also ask to see anonymised sample reports for similar residential schemes to verify the clarity and thoroughness of their engineering recommendations.

Why do ground investigation costs vary between different plots?

The cost depends largely on the time required on site, the depth of exploration, and the plant machinery required. Plots with poor vehicle access, hard bedrock, or sloping ground require specialised mini‑rigs or extended drilling. Additional chemical contamination analysis or geotechnical laboratory tests will also affect the overall cost.

How much does Kelki cost?

Nothing: Kelki is 100% free for you. Describe what you need in a few clicks, a professional in your area calls you back and tells you their price. The service is funded by the professionals.

Need a geotechnical engineer??
Get a call back.

100% free for you · No obligation · Describe your need in a few clicks
Geotechnical EngineerEverywhere in IrelandGeotechnical request · 100% free for youCall me back