Skip to content

Free · No obligation · A few clicks
Your need in one click
1.9 M+companies in our trades in AustraliaYour request goes to the BMS integrators in your area.
$0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

BMS Integrator nearby

Work with a qualified BMS Integrator to automate, monitor, and optimise your building services.

A BMS Integrator connects the mechanical and electrical equipment across commercial or industrial premises into a centralised control platform. They integrate heating, ventilation, air conditioning, and lighting into programmable controllers. These specialists help property and facility managers improve energy efficiency and maintain complete oversight across their premises. They also set up live data tracking to monitor real‑time utility consumption.

A typical project starts with an assessment of the existing electrical drawings and communication networks on site. The pro installs the outstations, runs communication cabling, and configures plant control loops. They then build intuitive graphical head‑ends on the supervisory PC. Finally, full commissioning and functional testing take place alongside the site facilities team.

Your areaEverywhere in AustraliaYour request goes to the BMS integrators around you.
Your request · BMS Integrator

Which service do you need?

Free · No obligation

Building management system services

An engineer inspects duct sensors and control valves during a commercial building energy audit
Common service

Energy Audit

An energy audit assesses the condition and performance of existing controls and network infrastructure across your premises. The specialist catalogues all current outstations, field sensors, and communication protocols. This detailed review pinpoints hardware faults, calibration drift, and missing metering before any upgrade works begin.

Free · No obligation
A controls specialist reviews electrical schematics with a facilities manager on site
Common service

Building Controls Compliance Assessment

This assessment reviews your building management system to ensure it meets current non‑domestic energy and building control standards. The specialist inspects control zoning, sub‑metering capture, and plant interoperability. You receive a gap analysis report setting out the adjustments required to reach optimal efficiency levels.

Free · No obligation
BMS Controller Installation in an electrical control panel by a specialist pro
Common service

BMS Controller Installation

The pro installs intelligent outstations inside plant room control panels and air handling unit enclosures. They handle the wiring of physical inputs and outputs to sensors, actuators, and valves. This service suits both new fit‑outs and the replacement of obsolete, unsupported legacy controllers.

Free · No obligation
A technician calibrates a digital heating controller beside a motorised valve in a plant room
Common service

Heating controller commissioning

This job covers the tuning of heating loops, weather compensation curves, and actuator stroke tests. The specialist configures heating schedules and setpoints around actual occupancy hours. You typically require commissioning after installing new commercial boilers or refurbishing heating plant rooms.

Free · No obligation
A programmer configures plant control sequences and night setbacks across twin monitors
Common service

BMS Sequence Programming

Sequence programming writes the operational logic that dictates how plant runs according to time schedules and ambient weather. The engineer codes optimum start‑stop routines, night setbacks, and public holiday schedules. This service prevents plant running unnecessarily during unoccupied periods.

Free · No obligation
A BMS Integrator designs graphical supervisory floor plans on a workstation monitor
Common service

BMS Graphics Design

The pro creates clear graphical floor plans, plant schematics, and hydraulic layout screens for your front‑end workstation. They integrate alarm logs, trend logs, and real‑time energy dashboards. This user‑friendly interface allows facilities staff to monitor and adjust site conditions remotely.

Free · No obligation
A technician tests terminal voltages with a multimeter during routine BMS panel maintenance
Common service

BMS Maintenance Contract

Routine maintenance includes backing up controller software, checking back‑up batteries, and inspecting communication bus health. The engineer tests high‑temperature cut‑outs, interlocks, and alarm triggers. Scheduled visits stop control drift and help avoid disruptive plant failures.

Free · No obligation
A controls pro troubleshoots a rooftop air handling unit network fault
Common service

HVAC Control Repair

This service resolves network communication dropouts, frozen controllers, and failing actuator drives. The controls specialist investigates the root cause on site or via remote access. Prompt repairs restore stable temperatures quickly if spaces overheat or plant trips out.

Free · No obligation
A BMS engineer terminates communication wiring into a plant room control panel using a laptop

When to call a BMS Integrator

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose a BMS Integrator

Ask for a clear, itemised quote or estimate setting out hardware, field wiring, software engineering, and commissioning separately.

  • Check that the pro holds appropriate public liability and professional indemnity insurance covering controls engineering.
  • Ensure they work proficiently with standard open protocols such as BACnet, Modbus, or KNX, protecting you from proprietary lock‑in.
  • Ask for examples of recent projects completed on commercial buildings similar in scale to yours.
  • Check whether you will receive full engineering passwords, source code, and handover documentation upon completion.
  • Avoid arrangements where software licences or front‑end graphics are kept restricted.
  • You should always remain free to choose any qualified firm for your ongoing servicing and maintenance.

What makes the price of a BMS Integrator

The total price depends on several project variables. The final figure is provided by the pro in a clear quote tailored to your site's specific requirements.

What affects the price

  • Total number of physical input/output points and networked devices
  • Floor area, building layout, and cable routing complexity
  • Age of existing switchgear, field wiring, and mechanical equipment
  • Detail required for custom head‑end graphics and reporting dashboards

Good to know

  • Price rules vary by state and territory: the information on this page applies nationwide.

Get a call back from a BMS Integrator

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeBMS IntegratorLocationEverywhere in AustraliaServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Your most common questions

What do modern automated controls do for commercial properties?

A building management system automatically monitors and regulates building services such as heating, ventilation, and air conditioning. It uses sensors, controllers, and scheduled setpoints to match plant operation to true occupancy. By recording energy consumption and raising alerts during equipment faults, it keeps commercial premises comfortable while lowering unnecessary energy use.

How does a BMS controls engineer carry out an installation?

The pro first studies the mechanical and electrical drawings along with existing control panels. They mount the outstations, terminate network cabling, and upload the control logic. Every sensor, valve, and fan interlock is point‑tested before connecting the controllers to the head‑end PC. Finally, they provide a handover demonstration to your site team.

What documentation should I gather before the pro arrives?

Provide current panel wiring schematics, mechanical layout drawings, and equipment schedules. It is also helpful to have site access permits ready, along with any existing network IP allocations and login credentials for your current controls software.

Which communication protocols are standard in building controls?

Controls engineers commonly work with open standards such as BACnet, Modbus, KNX, and M‑Bus. These protocols allow equipment from different manufacturers to exchange data reliably. Using non‑proprietary standards ensures you can expand or upgrade individual components later without having to replace the entire system.

How can I find and select the right BMS specialist?

Ask industry contacts for recommendations, check reviews from commercial property owners, and compare itemised written quotes. You can also submit your details on Kelki to be called back by an experienced controls pro serving your area. Confirm that they carry appropriate public liability cover and agree to hand over all system backups and engineering software access.

Why does building size impact the total cost of a BMS project?

The price reflects the total number of hardware points required, including temperature sensors, pressure switches, and control valves. Larger buildings involve longer cable runs and multiple control panels spread across plant rooms. Engineering the software and point‑to‑point testing naturally takes longer on extensive sites.

Can a BMS specialist support my premises remotely?

Initial surveys, panel wiring, sensor calibration, and physical commissioning require site attendance. Once the system is live, ongoing maintenance, schedule adjustments, and initial troubleshooting can often be handled remotely through an encrypted network connection.

What is the difference between individual plant controls and a full BMS?

Standalone controls manage a single isolated system, such as a packaged boiler unit or independent split AC system. A complete building management system brings heating, chillers, ventilation, and metering onto one central platform, allowing plant to interlock efficiently and share live sensor data across the whole site.

Need a BMS Integrator??
Get a call back.

Free · No obligation · Describe your need in a few clicks
BMS IntegratorEverywhere in AustraliaBMS controls request · Free · No obligationCall me back