Skip to content

Free · No obligation · A few clicks
Your need in one click
1.9 M+companies in our trades in AustraliaYour request goes to the electric motor rewinders in your area.
$0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Electric Motor Rewinder nearby

Find an Electric Motor Rewinder in Jerramungup for electric motor rewinding, overhauls, and pump repairs.

For professional electric motor rewinding, an Electric Motor Rewinder restores electric motors, industrial pumps, and geared units across production workshops and commercial sites. Working in Jerramungup, these specialists repair stators, rotors, and coils damaged by heavy wear or overheating. They strip worn copper windings, fit fresh slot insulation, and carry out varnish impregnation to rebuild dielectric strength. Rewinding your equipment extends the operational life of rotating plant without the high capital expense of sourcing brand‑new units.

Whether in the workshop or on site in Jerramungup, the overhaul begins with a thorough inspection while isolated. The pro dismantles the end shields, withdraws the rotor, and checks winding resistance using a megohmmeter. Depending on the test findings, they proceed with thermal burnout, rewinding, or changing worn parts such as mechanical seals and bearings. The complete assembly is then run on a test bed under no‑load and load conditions before being returned to service.

Your areaEverywhere in AustraliaYour request goes to the electric motor rewinders around you.
Your request · Electric Motor Rewinder

Which service do you need?

Free · No obligation

Electric motor rewinding and repair services

Technician fitting slot insulation and shaping freshly wound copper coils inside an electric motor frame
Common service

Electric motor rewinding

Electric motor rewinding involves stripping out burnt or degraded copper coils from a stator or rotor and rebuilding them. It is required after a short circuit, insulation breakdown, or severe overheating. The specialist strips the old coils, cleans the stator core slots, inserts fresh enamelled wire, and applies protective baking varnish.

Free · No obligation
Engineer fitting a new induction-heated ball bearing onto an electric motor rotor shaft
Common service

Bearing replacement

Bearing replacement restores smooth rotation along the motor shaft and prevents mechanical seizure. It is needed when you notice excessive vibration, grinding noises, or during scheduled plant overhauls. The pro pulls worn bearings using mechanical or hydraulic extractors, inspects bearing journals, and fits new units matched to load ratings.

Free · No obligation
Specialist testing motor winding insulation resistance using a modern digital megohmmeter
Common service

Motor diagnostic

A comprehensive motor diagnostic identifies the root cause of electrical faults or mechanical issues on rotating plant. It is carried out when breakers trip, running temperatures spike, or output drops. The technician carries out insulation resistance checks, surge testing, phase balance readings, and mechanical shaft inspections.

Free · No obligation
Technician replacing mechanical seals on a stainless steel submersible pump in a workshop
Common service

Submersible pump repair

Submersible pump repair restores water seals and internal electrical reliability in deep‑well and borehole pumps. It is required when insulation faults occur, moisture ingresses into the motor chamber, or the impeller jams. The pro rewinds the stator if burnt, replaces mechanical seals, and pressure‑tests the casing.

Free · No obligation
Pro inspecting the impeller, volute, and internal seals of a cast-iron sump pump on a workbench
Common service

Sump pump repair

Sump pump repair fixes drainage failures caused by debris build‑up, seal wear, or electrical tripping. It is necessary when the unit hums without pumping, repeatedly trips the supply, or suffers casing blockages. The pro cleans the volute, renews lip seals and gaskets, and overhauls or rewinds the internal electric motor.

Free · No obligation
Electrician wiring a brand-new start capacitor into the terminal box of a single-phase electric motor
Common service

Start capacitor replacement

Start capacitor replacement gives single‑phase motors the initial torque needed to spin up to speed. This job is required when the motor buzzes under power, struggles against load, or requires a manual push to start. The pro tests the microfarad rating of the existing unit and wires in an exact replacement.

Free · No obligation
Specialist installing a replacement run capacitor inside the terminal housing of a workshop motor
Common service

Run capacitor replacement

Run capacitor replacement maintains consistent operating torque and running efficiency in single‑phase equipment. It is recommended if the motor runs hot, loses power under normal load, or drops rotational speed. The technician safely discharges the circuit, tests the capacitance, and installs a component matching original specifications.

Free · No obligation
Technician bolting the drive-end shield onto a three-phase induction motor following an overhaul
Common service

Induction motor repair

Induction motor repair remedies electrical and mechanical issues in single‑phase and three‑phase squirrel‑cage units. It is essential after phase loss, sustained overload, or locked‑rotor conditions. The technician rewinds burnt windings, machines shaft journals or housings if worn, and runs final load tests.

Free · No obligation
An Electric Motor Rewinder in a workshop carefully inserting new copper coils into an electric motor stator

When to call an Electric Motor Rewinder

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose an Electric Motor Rewinder

When choosing an Electric Motor Rewinder, request a detailed written quote or estimate following an initial visual and electrical inspection.

  • The paperwork should list all planned tasks: stripping, rewinding, new bearings, dipping and baking, and dynamic balancing.
  • Enquire about workshop capabilities, such as burnout ovens, bake ovens, and electrical test panels.
  • Check that the pro holds valid public and product liability insurance covering customer equipment in their care.
  • You can also ask about their hands‑on experience with your specific kit, whether that covers heavy industrial three‑phase machinery, borehole pumps, or single‑phase drives.
  • Avoid anyone who cannot specify the temperature class of winding insulation used or who declines running tests before return.

What makes the price of an Electric Motor Rewinder

The total price depends on the specific job requirements below. The exact amount to pay will be clearly set out by the pro in a detailed quote or estimate for your machinery.

What affects the price

  • The power rating, physical frame size, and copper content of the motor
  • The winding configuration, number of poles, and operational speed
  • Whether a full rewind is required or a mechanical overhaul and bearing change
  • The cost of replacement wear parts such as bearings, capacitors, and mechanical seals

Good to know

  • Price rules vary by state and territory: the information on this page applies nationwide.

Get a call back from an Electric Motor Rewinder

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeElectric Motor RewinderLocationEverywhere in AustraliaServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Your town in Jerramungup

Major cities first, then all towns in alphabetical order. One click: your request is sent with the right location.

Your most common questions

How can I find a skilled Electric Motor Rewinder in Jerramungup?

Take down the full details from your motor's rating plate, including kW, voltage, and frame size. You can ask fellow engineering firms for recommendations, check reviews, and compare written estimates. Describing your job on Kelki lets an Electric Motor Rewinder based in Jerramungup call you back directly to discuss your machinery.

Can an Electric Motor Rewinder based in Jerramungup visit our facility on site?

Yes, on‑site callouts depend on the physical size of the machinery and site access. For heavy fixed plant or large pumps, a specialist can visit to carry out insulation testing, fault diagnosis, and removal. Core rewinding, burnout, and varnish curing are completed back in the workshop.

What is the difference between an Electric Motor Rewinder and an industrial electrician?

An industrial electrician works mainly on mains power supplies, distribution boards, control panels, and field cabling. An Electric Motor Rewinder specialises internally in rotating electrical plant, rewinding burnt stator coils, fitting internal bearings, rebuilding rotors, and balancing rotating shafts.

Is it better to repair an electric motor or purchase a replacement unit?

Rewinding is normally the preferred route for large motors, specialised geared units, or obsolete frame sizes where replacement pipework or baseplates would be costly. For small, off‑the‑shelf standard motors, the labour cost to rewind may occasionally mean buying new is more economical.

What information should I supply to get an accurate electric motor rewinding quote?

A clear photograph of the motor nameplate is the most helpful detail, showing the power rating, RPM, voltage, and serial number. Mention whether it is single‑phase or three‑phase and describe the fault, such as smoke, tripping, locked shaft, or water contamination.

How is an electric motor overhauled and rewound in a workshop?

The pro strips the motor down and records original winding configurations, wire gauges, and turns per coil. Old copper is removed in a temperature‑controlled burnout oven to protect the stator laminations. New coils are wound, inserted, wedged, varnished, baked, and reassembled with new bearings.

What tests are carried out after completing electric motor rewinding?

Before returning the equipment, the workshop conducts standard electrical and mechanical checks. These include insulation resistance tests with a megohmmeter, winding resistance balance tests, and earth continuity checks. A no‑load test run confirms smooth rotation, correct bearing temperatures, and low vibration.

What factors influence the total price of electric motor repairs?

The overall cost depends on the motor power rating, frame size, and copper weight required. Labour varies with the complexity of the winding pattern and pole count. Necessary mechanical work, such as bearing sleeve repairs, dynamic shaft balancing, or seal replacements, will also affect the final price.

Need an Electric Motor Rewinder??
Get a call back.

Free · No obligation · Describe your need in a few clicks
Electric Motor RewinderJerramungupElectric motor rewinding request · Free · No obligationCall me back