Skip to content

Free · No obligation · A few clicks
Your need in one click
7districts in IsraelYour request goes to the automation engineers in your area.
₪0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Automation Engineer nearby

An Automation Engineer to design, code, and troubleshoot industrial automation services across your facility.

When sourcing reliable industrial automation services, an Automation Engineer designs, configures, and maintains the automated control systems keeping your site running. They work directly on programmable logic controllers, industrial networks, and SCADA interfaces. Their primary remit is to automate plant machinery safely without requiring ongoing manual oversight. They review project specifications, write control logic, and wire up field sensors and actuators.

Before starting work, the pro reviews your wiring schematics and existing program files. They then travel to your facility or plant floor to upload the code or trace a persistent fault. During breakdowns, they connect an engineering laptop to diagnose blocked variables and hardware issues. Once testing wraps up, they leave you with fully updated software backups and clear technical documentation.

Your areaEverywhere in IsraelYour request goes to the automation engineers around you.
Your request · Automation Engineer

Which service do you need?

Free · No obligation

Industrial automation services

An engineer troubleshooting an automation cabinet during a breakdown using a digital multimeter and tablet
Common service

Industrial automation troubleshooting

Industrial automation troubleshooting restores an automated work cell brought down by hardware failures or code issues. The Automation Engineer arrives on site with diagnostic tools to trace component faults, fix communication dropouts, and restore corrupted PLC software. It is ideal for facilities tackling unplanned production line shutdowns.

Free · No obligation
The engineer examining an optical sensor and industrial wiring on a packaging line
Common service

Machine breakdown diagnostics

Machine breakdown diagnostics pin down the source of recurring trips or stoppages across industrial equipment. The pro reviews alarm histories, inspects PLC input and output modules, and tests field sensors. They confirm whether the failure stems from control logic, electrical faults, or mechanical wear, resolving tricky intermittent issues.

Free · No obligation
A programmer writing PLC logic blocks on a mobile workstation overlooking the factory floor
Common service

PLC programming

PLC programming involves writing and structuring the logic that drives your machinery's operating cycles. The engineer converts your speed, sequencing, and safety criteria into standard PLC code. They build functional code blocks, configure network communication, and dry‑run sequences, whether building new equipment or retrofitting existing lines.

Free · No obligation
A technician neatly terminating electrical wiring and components inside a large industrial control panel
Common service

Control panel wiring

Control panel wiring forms the physical backbone connecting low‑voltage power supplies to high‑level controllers. The specialist mounts PLCs, breakers, relays, and terminal blocks inside an industrial enclosure. They label wiring according to industry conventions and run connections out to field devices when installing or upgrading panels.

Free · No obligation
An engineer commissioning a sorting system using an industrial remote pendant
Common service

Machine commissioning

Machine commissioning verifies that industrial machinery operates reliably and safely on your factory floor. The engineer uploads final software builds, confirms motor rotation, and calibrates field sensors. They test functions step by step, running manual checks before ramping up to full production speeds ahead of formal handover.

Free · No obligation
A specialist aligning an optical safety light curtain around an automated packing cell
Common service

Machine safety implementation

Machine safety implementation shields production staff from mechanical hazards and electrical faults. The specialist integrates safety PLCs, light curtains, interlocks, and emergency stop circuits that align with relevant safety standards. They validate required performance levels and test every safety shutdown circuit before operation.

Free · No obligation
A control engineer designing SCADA mimic screens on multi-monitor displays in a control room
Common service

SCADA development

SCADA development provides visual interfaces for real‑time supervisory control and data acquisition across your facility. The engineer designs plant overview screens, configures historical trending, and sets up alarm handling. Operators can easily oversee operations from control room screens, aiding plant upgrades or additions.

Free · No obligation
An engineer reviewing detailed electrical CAD schematics and wiring plans on a computer monitor
Common service

Electrical schematic design

Electrical schematic design defines the hardware architecture and electrical pathways across your manufacturing equipment. Using dedicated CAD tools, the pro produces power distribution drawings, I/O schematics, and enclosure layouts. They deliver comprehensive bills of materials and wire run schedules ready for panel assembly or line overhauls.

Free · No obligation
An Automation Engineer configuring an industrial control panel using a rugged laptop beside an automated line

When to call an Automation Engineer

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose an Automation Engineer

When choosing an Automation Engineer, request a written proposal covering design, coding, testing, and on‑site commissioning.

  • Check their experience with your specific PLC hardware brands and industrial networking protocols.
  • Confirm they hold appropriate general liability and professional liability insurance for working in industrial settings.
  • Ensure they have the necessary electrical safety qualifications to work within live control panels on your premises.
  • Ask for references from similar industrial projects in your industry.
  • Be cautious of contractors who do not supply fully commented source code and backups at project completion.
  • A methodical pro always documents their code clearly and sets out clear acceptance criteria before work begins.

What determines the cost of an Automation Engineer

The total price depends on the variables below. The exact amount to pay will be stated in the pro's quote or estimate, tailored to your site requirements.

What affects the price

  • Complexity of the control system architecture
  • Whether work is conducted on site or via remote access
  • Programming scope and overall input/output count
  • Urgency and nature of the emergency breakdown call‑out

Get a call back from an Automation Engineer

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeAutomation EngineerLocationEverywhere in IsraelServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Your most common questions

What information should I supply before the Automation Engineer arrives?

Provide up‑to‑date electrical schematics, the latest PLC program backups, and part numbers for installed hardware. Include a thorough summary of the reported fault or the scope of work for any modifications. Note site access arrangements, preferred working hours, and any facility‑specific health and safety requirements.

Does an Automation Engineer work on site or remotely?

Both options are standard, depending on the job. Initial PLC programming, logic changes, and SCADA screen development often take place offsite. On the other hand, hardware wiring, physical diagnostics, panel modifications, and commissioning require an engineer onsite. Certain software faults can also be investigated via secure remote access.

What handover documentation should I receive at the end of a project?

The pro should provide unlocked, commented source files for both the PLC code and any HMI or SCADA projects. You should also receive as‑built electrical schematics, control panel layout plans, and full parts lists. They ought to include signed validation test sheets along with operational guidance for your maintenance team.

What insurance and safety credentials should I verify?

Check that the contractor carries adequate commercial third‑party liability insurance alongside professional indemnity coverage. When opening control enclosures or working around plant machinery, make sure they hold appropriate electrical safety and industrial site qualifications. If their tasks involve heavy machinery, aerial lifts, or working at height, ask to see relevant operator certifications.

How does the machine commissioning process unfold?

The engineer starts by checking the I/O point‑to‑point wiring while de‑energized, then powers up the system. They download the program and test every actuator manually. Next, they run automated dry runs without material, followed by full‑load production tests. The process concludes with operator handover and formal sign‑off.

Why hire an Automation Engineer to carry out machine safety upgrades?

An Automation Engineer knows how to integrate safety PLCs, laser area scanners, and emergency stop networks safely. They make sure the safety‑related parts of the control system comply with applicable machinery safety standards. Their input helps prevent workplace injuries by reliably disabling hazardous motion whenever a guard or interlock trips.

What factors influence the total price of an automation job?

Pricing depends on the depth of software required, total I/O count, and network complexity. Urgent service calls for unexpected line shutdowns may also involve different rates compared to planned project work. Finally, the total price is shaped by travel expenses and the on‑site engineering time required for testing.

What is the difference between a PLC and a SCADA system?

A programmable logic controller executes real‑time control logic, reading sensors and triggering actuators to run machines directly. A SCADA system is supervisory software hosted on an industrial PC. It pulls data from multiple PLCs to show system status screens, log historical trends, and allow operators to oversee wider operations.

Need an Automation Engineer??
Get a call back.

Free · No obligation · Describe your need in a few clicks
Automation EngineerEverywhere in IsraelIndustrial automation request · Free · No obligationCall me back