Skip to content

100% free for you · No obligation
Your need in one click

Kelki targets the best

GoogleTrustpilot

Kelki targets the best

GoogleTrustpilot

2 M+companies in our trades in the United KingdomYour request goes to the bath resurfacers in your area.
£0for you, 100% freeKelki is funded by the professionals. No obligation.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Bath Resurfacer nearby

A Bath Resurfacer to restore surfaces and repair chips with professional bath re enamelling.

A Bath Resurfacer restores worn, dull, chipped, or cracked sanitary surfaces through expert bath re enamelling, without needing to replace the tub. This specialist works on cast iron, enamelled steel, or acrylic materials. Their work provides a clean, smooth finish without breaking existing tiles or altering the room's plumbing.

The pro starts by stripping, degreasing, and sanding the surface to ensure lasting adhesion. They fill chips with suitable resins, then apply a cold enamel coating or polyurethane resin by spraying. The job takes place on‑site, right in your bathroom, with wall protection and careful ventilation.

Your areaEverywhere in the United KingdomYour request goes to the bath resurfacers around you.
Your request · Bath Resurfacer

Which service do you need?

Free · No obligation

Bath re enamelling services

A professional inspects the even shine of a fully resurfaced bath using an LED inspection lamp
Common service

Bathtub resurfacing

Bathtub resurfacing restores the look of the entire tub without tearing apart the bathroom. The pro strips the old coating, neutralises limescale deposits, and applies several coats of finishing resin. This is ideal for tubs that have become rough, discoloured, or hard to clean daily.

Free · No obligation
A technician enamels the inside walls of a heavy cast iron bath with a low-pressure spray gun
Common service

Cast iron bath resurfacing

Cast iron bath resurfacing preserves an older fixture without demolishing the bathroom. The specialist treats oxidation, applies a primer suited for ferrous metals, and sprays a glossy finishing resin. This avoids the complex removal of a heavy tub often built into existing tiles.

Free · No obligation
The technician carefully applies a resin filler to a chipped spot in the bottom of the bath with a spatula
Common service

Bath chip repair

Bath chip repair stops localised wear caused by dropping a heavy object into the tub. The pro cleans the impact area, fills the dent with durable synthetic filler, and matches the colour to hide the repair. This quick touch‑up protects the underlying metal from rusting.

Free · No obligation
An operator carefully stabilises a crack on an acrylic bath using a precision rotary tool
Common service

Bath crack repair

Bath crack repair strengthens the tub's structure to prevent leaks into the floor. The technician stabilises the split, injects specific reinforcing resins, and sands the treated area before applying a waterproof finish. This is often used for modern acrylic or composite resin fixtures.

Free · No obligation
The professional applies a smooth bead of white sanitary silicone along the bath and wall tiles
Common service

Bath resealing

Bath resealing ensures a watertight edge between the tub and tiled walls. The pro applies a smooth, even bead of anti‑fungal sanitary sealant to stop moisture penetration. This service is done after full drying to protect adjoining walls from mould.

Free · No obligation
A specialist applies a textured anti-slip coating with a roller to the bottom of a bath in a bathroom
Common service

Anti‑slip coating

Anti‑slip coating makes standing in the bath safer during a shower. The professional applies a clear or coloured textured finish directly into the bottom coating of the tub. This is a great alternative to rubber mats, which are often hard to clean and can harbour bacteria.

Free · No obligation
The technician removes degraded old silicone sealant along the bath with a specialised scraper
Common service

Old sealant removal

Old sealant removal takes away blackened, peeling, or mouldy beads that no longer work. The specialist carefully scrapes off sealant residue, removes ingrained silicone, and disinfects the contact surface. This thorough preparation ensures the new seal will hold and remain watertight.

Free · No obligation
An operator wet-sands a filled impact point on the enamel to restore a perfectly smooth feel
Common service

Enamel chip repair

Enamel chip repair treats shallow dents or clean chips on sanitaryware. The professional sands the damaged area, applies a dense resin compound, and sprays a lacquer matched to the exact shade. This process restores a seamless look and feel to hard enamelled surfaces.

Free · No obligation
A tradesperson wearing a protective mask applies a renovation resin with a spray gun around the edges of a bath

When to call a Bath Resurfacer

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose a Bath Resurfacer

Check that the estimate details each technical step: chemical or mechanical stripping, anti‑corrosion treatment, primer application, and the number of resin coats.

  • Ask the pro for their public liability insurance covering interior work.
  • Ask about their method for ventilating the room during solvent spraying and the mandatory drying time before using water again.
  • A good technician will show you photos of similar jobs.
  • Be wary of vague proposals that mention simple painting without thorough surface preparation or careful protection of nearby taps and tiles.

What makes the price of a Bath Resurfacer

The price mainly depends on the elements below. The exact price is the total amount the professional displays or includes on their estimate, tailored to your needs.

What affects the price

  • Material of the fixture, such as cast iron or acrylic
  • Extent of the damage, from local touch‑ups to full resurfacing
  • Level of surface degradation and rust marks
  • Accessibility of the tub and ventilation constraints

Get called back by a Bath Resurfacer

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your request100% free
TradeBath ResurfacerLocationEverywhere in the United KingdomServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · 100% free for you

Your most common questions

How does on‑site bath resurfacing work?

The pro first protects the floor, walls, and taps. They sand the tub to remove worn enamel and clean away impurities. They fill scratches and chips with a special filler. Once this base is dry, they spray an adhesion primer followed by finishing resin coats, before ventilating the room.

Do I need to remove the bath for re enamelling?

No, the work is done directly in the bathroom without breaking tiles or altering plumbing connections. The Bath Resurfacer brings mobile equipment, vapour extraction systems, and low‑pressure spray guns. The tub stays sealed in its original spot throughout the job.

What documents should I ask for before agreeing to the work?

Ask for a written estimate listing the surface preparation, products applied, and solvent extraction method. Also request a valid public liability insurance certificate. This document covers any potential property damage caused while working in your home.

How long must I wait before using the bath?

The full curing time depends on the polyurethane or acrylic resins applied by the technician. The surface is often touch‑dry in a few hours, but internal chemical cross‑linking requires several days of complete rest. The pro will give you the exact timeframe to follow before turning the water back on.

How do I clean a bath after it has been re enamelled?

Use only mild, non‑abrasive products, such as soapy water or ordinary washing‑up liquid, applied with a non‑scratch sponge. Avoid scouring powders, stiff brushes, acetone, and concentrated acidic detergents. Regular rinsing prevents limescale build‑up without damaging the protective resin film.

What factors change the total price on an estimate?

The amount depends on the size of the bath, the material, and any oxidation on cast iron. A quick chip repair takes less time than full bath re enamelling. Poor ventilation in the home or the need to remove degraded old sealant also affects labour time.

Does the pro work on fixtures other than baths?

Yes, this specialist can resurface shower trays, washbasins, ceramic bowls, and cast iron or fireclay kitchen sinks. The preparation steps and products applied remain similar. They adapt their work to the shape of each item and the level of wear found on site.

What should I do before the technician arrives at my home?

Clear the space around the bath by removing shower curtains, towels, bottles, and light furniture. Make sure the tap does not drip at all to prevent moisture during application. Finally, ensure that windows or the home's ventilation systems are easily accessible.

How much does Kelki cost?

Nothing: Kelki is 100% free for you. Describe what you need in a few clicks, a professional in your area calls you back and tells you their price. The service is funded by the professionals.

Need a Bath Resurfacer??
Get a call back.

100% free for you · No obligation · Describe your need in a few clicks
Bath ResurfacerEverywhere in the United KingdomBath Resurfacer request · 100% free for youCall me back