Skip to content

Free · No obligation · A few clicks
Your need in one click
2 M+companies in our trades in the United KingdomYour request goes to the dust extraction engineers in your area.
£0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Dust Extraction Engineer nearby

A Dust Extraction Engineer near you for industrial dust extraction systems and cleaner workshops.

A Dust Extraction Engineer designs, installs, and maintains industrial dust extraction systems for manufacturing and production environments. Operating near you, this pro captures airborne dust, fumes, swarf, and volatile particulates directly at source. Their work protects workforce health, limits plant safety hazards, and helps maintain workplace regulatory compliance.

For facilities located in your area, the pro begins with an engineering assessment of your machinery and transfer points. They determine capture velocities, specify the right filtration technology, and evaluate explosive dust risks. Once the engineering proposal is agreed, they install ductwork, connect extraction fans, and balance airflow across the system. They can also schedule routine servicing and filter element replacements.

Your areaEverywhere in the United KingdomYour request goes to the dust extraction engineers around you.
Your request · Dust Extraction Engineer

Which service do you need?

Free · No obligation

Industrial dust extraction services

A pro assessing combustible dust compliance on a filter hopper using a thermal imaging camera
Common service

DSEAR compliance audit

A DSEAR compliance audit evaluates fire and explosion hazards caused by combustible dust clouds. The pro surveys your dust extraction plant, categorises hazardous zones, and confirms that electrical and mechanical gear meets necessary protection standards. They compile the formal explosion risk documentation required for your site health and safety records.

Free · No obligation
An engineer measuring airflow velocity inside a circular ventilation duct using a Pitot tube
Common service

Airflow measurement

Airflow measurement checks capture velocity and extraction rates at each hood and pickup point. The pro uses anemometers and Pitot tubes to record duct velocities and static pressures. This service is essential for routine ventilation compliance, balancing industrial ductwork, and keeping extraction working effectively.

Free · No obligation
A pro inserting a clean filter cartridge into an open industrial extraction housing
Common service

Filter cartridge replacement

Replacing filter cartridges restores proper airflow and particulate capture in industrial extraction units. The pro removes blinded elements, vacuums the clean air chamber, and fits new media matched to your specific dust type. This service is needed when differential pressure spikes or during planned maintenance visits.

Free · No obligation
A technician fitting a new fabric filter bag into the tube sheet of an industrial baghouse
Common service

Filter bag replacement

Filter bag replacement maintains high‑capacity baghouses using reverse‑jet or mechanical shaking. The pro strips down support cages, safely extracts spent sleeves, and installs fresh, securely clamped filter bags. Book this when bags tear, extraction drops off, or media reaches the end of its working life.

Free · No obligation
An installer securing a run of galvanised steel spiral ductwork from a mobile access platform
Common service

Ductwork installation

Ductwork installation conveys contaminated air from production hoods straight into your central extraction plant. The pro installs galvanised or mild steel spiral ducting designed for high abrasion and airtight performance. This is typically scheduled for new workshops, extra plant machinery, or complete ventilation revamps.

Free · No obligation
A pro calibrating a differential pressure switch mounted on an external filtration casing
Common service

Differential pressure measurement

Differential pressure measurement tracks the pressure drop across filter media to assess dust loading. The pro inspects, tests, or calibrates differential pressure gauges and pulse controllers to monitor filter health. This testing helps avoid fan motor strain, cuts unnecessary energy waste, and schedules timely filter changes.

Free · No obligation
An engineer connecting compressed air lines to a compact cartridge dust collector
Common service

Cartridge dust collector installation

Installing a cartridge unit provides your workshop with a compact solution for fine process dust. The pro positions the collector, connects the main duct run, hooks up compressed air for pulse cleaning, and commissions the unit. It is well suited for industrial welding bays, sanding benches, and laser cutting lines.

Free · No obligation
A pro checking drive bearings and impeller alignment on an industrial centrifugal extraction fan
Common service

Fan repair

Centrifugal fan repair restores the primary motive power driving your industrial extraction system. The pro inspects impeller balance, swaps out worn bearings, tightens drive belts, and fixes electrical drive motors. This service resolves excessive vibration, mechanical screeching, or sudden loss of extraction draft.

Free · No obligation
An engineer wearing a hard hat inspecting an access hatch on an industrial dust extraction unit with a digital tablet

When to call a Dust Extraction Engineer

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose a Dust Extraction Engineer

Ensure the pro has verifiable experience handling your specific process dust, whether dry, sticky, or combustible.

  • Ask about their competence in explosive atmospheres as well as mechanical and electrical ventilation work.
  • Require a comprehensive technical proposal detailing target capture velocities, system pressure drops, and relevant industry standards.
  • Be cautious of quotes that leave out motor ratings, filtration surface area, or exact filter media specifications.
  • A knowledgeable engineer will inspect your production layout before sizing a system or recommending equipment.
  • It is also wise to check whether they can supply routine replacement parts, such as filter cartridges and drive belts, during regular servicing.

What makes the price of a Dust Extraction Engineer

The total price depends mainly on the scope of work below. The actual cost is set out in the detailed quote or estimate provided by the pro for your installation.

What affects the price

  • Required airflow capacity and collector size
  • Dust characteristics, abrasiveness, and explosibility
  • Total length, diameter, and layout of ductwork runs
  • Site accessibility and working at height requirements

Get a call back from a Dust Extraction Engineer

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeDust Extraction EngineerLocationEverywhere in the United KingdomServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Dust Extraction Engineer by county

Choose your county, then your town.

Aberdeen CityT5AberdeenshireT6AngusT7Antrim and NewtownabbeyN09000001Ards and North DownN09000011Argyll and ButeT8Armagh City, Banbridge and CraigavonN09000002BedfordshireC-bedfordshireBelfastN09000003BerkshireC-berkshireBlaenau GwentX2BridgendX3BristolC-bristolBuckinghamshireC-buckinghamshireCaerphillyX4CambridgeshireC-cambridgeshireCardiffX5CarmarthenshireX7Causeway Coast and GlensN09000004CeredigionX6CheshireC-cheshireCity of EdinburghU8ClackmannanshireU1ConwyX8CornwallC-cornwallCounty DurhamC-county-durhamCumbriaC-cumbriaDenbighshireX9DerbyshireC-derbyshireDerry City and StrabaneN09000005DevonC-devonDorsetC-dorsetDumfries and GallowayU2Dundee CityU3East AyrshireU4East DunbartonshireU5East LothianU6East RenfrewshireU7East Riding of YorkshireC-east-riding-of-yorkshireEast SussexC-east-sussexEssexC-essexFalkirkU9Fermanagh and OmaghN09000006FifeV1FlintshireY1Glasgow CityV2GloucestershireC-gloucestershireGreater LondonC-greater-londonGreater ManchesterC-greater-manchesterGwyneddY2HampshireC-hampshireHerefordshireC-herefordshireHertfordshireC-hertfordshireHighlandV3InverclydeV4Isle of AngleseyX1Isle of WightC-isle-of-wightKentC-kentLancashireC-lancashireLeicestershireC-leicestershireLincolnshireC-lincolnshireLisburn and CastlereaghN09000007MerseysideC-merseysideMerthyr TydfilY3Mid and East AntrimN09000008Mid UlsterN09000009MidlothianV5MonmouthshireY4MorayV6Na h‑Eileanan SiarW8Neath Port TalbotY5NewportY6Newry, Mourne and DownN09000010NorfolkC-norfolkNorth AyrshireV7North LanarkshireV8North YorkshireC-north-yorkshireNorthamptonshireC-northamptonshireNorthumberlandC-northumberlandNottinghamshireC-nottinghamshireOrkney IslandsV9OxfordshireC-oxfordshirePembrokeshireY7Perth and KinrossW1PowysY8RenfrewshireW2Rhondda Cynon TafY9RutlandC-rutlandScottish BordersT9Shetland IslandsW3ShropshireC-shropshireSomersetC-somersetSouth AyrshireW4South LanarkshireW5South YorkshireC-south-yorkshireStaffordshireC-staffordshireStirlingW6SuffolkC-suffolkSurreyC-surreySwanseaZ1TorfaenZ2Tyne and WearC-tyne-and-wearVale of GlamorganZ3WarwickshireC-warwickshireWest DunbartonshireW7West LothianW9West MidlandsC-west-midlandsWest SussexC-west-sussexWest YorkshireC-west-yorkshireWiltshireC-wiltshireWorcestershireC-worcestershireWrexhamZ4

Your most common questions

How can I find a Dust Extraction Engineer near you?

Ask industry contacts, read customer feedback, and compare detailed written quotes or estimates. You can also describe your requirements on Kelki to arrange a prompt call back from a pro working in your area.

Will a pro based near you travel to surrounding sites?

Yes, pros routinely cover industrial estates and manufacturing plants across the wider region. They carry testing instruments, balancing gear, and installation tools straight to your facility. Any applicable travel charges or attendance rates will be stated on your written estimate or quote.

What is the difference between a cartridge collector and a baghouse?

Cartridge units handle very fine dusts while packing large surface areas into a compact footprint. Baghouse systems suit heavier dust loads, fibrous materials like timber shavings, and high air volumes. The ideal setup depends on dust particle size and overall operational volume.

How often should local exhaust ventilation systems be inspected?

Industrial extraction plant requires regular statutory performance checks to confirm it safely controls airborne hazards. This thorough examination covers hood capture speeds, duct velocities, and filter condition. Records must be maintained in your site ventilation logbook.

What is a hazardous dust zone in an industrial workshop?

A hazardous zone is an area where combustible dust forms explosive clouds or layers in air. A risk assessment classifies these zones based on frequency and duration. Plant within these areas must feature suitable mechanical protection, explosion vents, or isolation valves.

What details should you prepare before the engineer arrives on site?

Gather workshop layouts, a list of dust‑producing machines, and safety data sheets for all processed materials. Note the location of electrical isolators and compressed air supplies. These details help the engineer calculate air volumes, duct dimensions, and fan duties accurately.

How can you tell if an extraction filter is clogged?

A high reading on your differential pressure gauge indicates loaded media. You may also notice reduced capture at hoods and visible dust settling on nearby worktops. When automatic reverse‑jet cleaning fails to bring pressure drop back down, replacement filters are required.

What documentation should you receive after a ductwork installation?

Request the airflow commissioning report showing measured capture velocities at every pickup. Obtain fan operation manuals, duct schematics, and manufacturer declarations of conformity. These documents are needed to keep your facility ventilation files up to date.

Need a Dust Extraction Engineer??
Get a call back.

Free · No obligation · Describe your need in a few clicks
Dust Extraction EngineerEverywhere in the United KingdomDust extraction request · Free · No obligationCall me back