Skip to content

Free · No obligation · A few clicks
Your need in one click
2.2 M+companies in our trades in CanadaYour request goes to the engine machinists in your area.
$0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Engine machinist nearby

Find an engine machinist among trusted engine rebuilders for expert machining, testing, and complete engine block rebuilding.

Engine rebuilders and an engine machinist provide specialized mechanical rebuilding and machining for combustion engine components. This technician works on cylinder heads, blocks, crankshafts, and connecting rods. They correct warping caused by high mileage or overheating. Their machine shop is equipped with specific machine tools like surface grinders, boring machines, and honing machines. They restore the original dimensions specified by automotive and marine manufacturers.

To use this pro's services, you generally drop off the dismantled parts or the complete block at the machine shop. The machinist first cleans and dimensionally checks each component. They then provide an estimate detailing the necessary machining operations. Once the work is done, they hand back the machined parts, along with the metrological measurement reports.

Your areaEverywhere in CanadaYour request goes to the engine machinists around you.
Your request · Engine machinist

Which service do you need?

Free · No obligation

Engine rebuilding and machining services

High-precision resurfacing of a car cylinder head on a machine tool guided by an attentive technician
Common service

Cylinder head resurfacing

Cylinder head resurfacing flattens the mating surface after an engine overheats. The pro machines a fine layer of material to restore a perfectly flat surface. This operation is essential before fitting a new gasket or rebuilding the top end to prevent leaks.

Free · No obligation
Pressure testing a submerged cylinder head in a hot water tank in an engine machine shop
Common service

Cylinder head pressure testing

Cylinder head pressure testing checks the internal seal of the cooling system using pressurized hot air. The machinist immerses the part in a heated tank to spot any invisible cracks. This service is vital before any resurfacing to avoid machining a cracked or porous cylinder head.

Free · No obligation
Reboring and honing a cast iron engine block on a vertical machine by a qualified operator
Common service

Engine block machining

Engine block machining includes resurfacing the top deck as well as remachining the cylinder bores. The technician rebores and hones the cylinders to accommodate new pistons at repair dimensions. This intervention corrects ovality or scoring resulting from heavy wear.

Free · No obligation
Micrometric inspection of crankshaft crankpins during machining on a grinding lathe
Common service

Crankshaft grinding

Crankshaft grinding restores the bearing journals and crankpins worn down by friction. The pro remachines the surfaces to specific repair dimensions to eliminate scoring. They then supply bearings of the appropriate thickness to ensure the correct operating clearance.

Free · No obligation
Complete reassembly of new connecting rods and pistons in a freshly remachined engine block in a machine shop
Common service

Complete engine rebuild

A complete engine rebuild involves dismantling, inspecting, machining, and reassembling the entire automotive or marine engine. The machinist replaces wear parts like piston rings, bearings, valves, and gaskets. This service is ideal for classic car owners or blocks that have suffered internal failure.

Free · No obligation
Dimensional diagnostics of a dismantled engine with technical explanations provided to the vehicle owner
Common service

Engine diagnostics

Engine diagnostics involve measuring the wear of mechanical parts brought into the machine shop. The machinist carries out dimensional checks with a micrometer, run‑out verifications, and surface inspections. This metrological analysis helps determine the necessary machining or assess whether out‑of‑tolerance components need replacing.

Free · No obligation
Careful installation of a new multi-layer head gasket on a machined engine block before assembly
Common service

Head gasket installation

Head gasket installation takes place in the machine shop when assembling reconditioned engine sub‑assemblies. The pro determines the exact gasket thickness based on the material removed during machining and piston protrusion. They position the new gasket during the mechanical fitting before returning the parts to the customer.

Free · No obligation
Checking the flatness of a cylinder head using a precision straight edge and feeler gauges
Common service

Cylinder head flatness check

A cylinder head flatness check verifies if the contact surface is warped or distorted. Using a precision straight edge and feeler gauges, the pro measures deviations across several axes. This check determines whether a pass on the surface grinder is necessary.

Free · No obligation
An engine machinist machining a car cylinder head on a milling and grinding machine in a well-equipped modern machine shop

When to call an engine machinist

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose an engine machinist

Check the machine shop's equipment, particularly the presence of surface grinders and precision boring machines.

  • Ask for a written estimate detailing each machining operation, the cost of metrology, and the necessary replacement parts.
  • Ask the pro about their ability to source the manufacturer's specification sheets for your engine model.
  • You can request proof of commercial general liability insurance covering machining work.
  • Avoid shops that refuse to carry out a pressure test before machining a cylinder head that has overheated.
  • A reliable provider will always give you a dimensional inspection report with the treated parts.

What makes the price of an engine machinist

The price mainly depends on the factors below. The exact price is the one the pro displays or includes on their estimate, tailored to your needs.

What affects the price

  • The type and number of engine cylinders
  • The number of machining operations required
  • The supply of suitable replacement parts
  • The initial distortion level of the metal components

Good to know

  • Price rules vary by province: the information on this page applies nationwide.

Call me back by an engine machinist

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeEngine machinistLocationEverywhere in CanadaServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Your most common questions

Do I need to bring the complete engine or just the dismantled parts?

Most engine machinists prefer to receive bare, degreased parts, such as the cylinder head alone or the bare block. If you lack the mechanical skills to strip it down, some shops accept the complete engine. They will then handle the dismantling, cleaning, and marking of components before starting the machining operations.

Why is pressure testing recommended before resurfacing a cylinder head?

Pressure testing checks if the cylinder head has internal micro‑cracks invisible to the naked eye. If the metal is cracked between a combustion chamber and a water jacket, resurfacing the part would be pointless. This step prevents spending money on machining an irreparable component that needs replacing.

What documents or information should I provide to the engine machinist?

Provide the vehicle ownership or registration details, or the engine block's manufacturer identification plate. This information allows the technician to find the official technical data sheet for the engine. They use it to find the nominal dimensions, permitted machining tolerances, operating clearances, and required torque specs.

What is a repair dimension for an engine?

A repair dimension is a standardized machining size, slightly larger for a cylinder or smaller for a crankshaft journal. The machinist removes the damaged metal until reaching this exact new value. They then order specific pistons or bearings corresponding to this thickness to maintain perfect operating clearance.

Does the engine machinist offer mobile services?

Rebuilding and machining work takes place exclusively in the machine shop due to the heavy equipment required. However, many pros offer pickup and delivery of heavy parts via courier or their own transport. You can organize these logistics when getting the initial estimate.

What factors affect the cost of an engine machining estimate?

The price depends on the part's material, its size, and its level of distortion. A cast iron block requires a different machining time than an aluminum alloy one. The number of cylinders, replacing guides or valves, and supplying gaskets or bearings also change the total cost of the job.

Can a cylinder head be resurfaced multiple times?

A cylinder head can only be resurfaced within the minimum thickness limit specified by the automaker. If too much material is removed, the combustion chamber volume decreases and the compression ratio becomes too high. The machinist measures the remaining height of the cylinder head before agreeing to machine it.

What checks should I make when receiving the machined parts?

Visually inspect the condition of the mating surfaces, which should be perfectly smooth and free of scratches. Ask the pro for the dimensional inspection document showing the final measurements achieved. Also, check that the oil and water galleries have been thoroughly cleaned of any metal swarf from the machining process.

Need an engine machinist??
Get a call back.

Free · No obligation · Describe your need in a few clicks
Engine machinistEverywhere in CanadaEngine machinist request · Free · No obligationCall me back