2.2 M+companies in our trades in CanadaYour request goes to the luthiers in your area.
$0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.
Luthier nearby
A local luthier near you to set up, repair or restore your string instruments.
A luthier designs, services and repairs acoustic, electric, and orchestral string instruments. Working with classical, acoustic, and electric guitars, basses, as well as violins, violas, and cellos, this specialist craftsperson works in the workshop to refine action, correct intonation, reglue loose joints, and replace worn components. Their detailed care preserves the tone, playability, and resonance of your instruments near you.
To have your instrument repaired or serviced in your area, start by detailing the issue or the work you would like carried out. The professional will inspect the condition of the wood, neck, fingerboard, and hardware. They will then provide an estimate or quote outlining the required parts and labour. Once you give the go‑ahead, the craftsperson completes the work on the bench before carrying out final play‑testing and tuning.
Your areaEverywhere in CanadaYour request goes to the luthiers around you.
Your request · Luthier
Which service do you need?
Free · No obligation
Lutherie and repair services
Common service
Guitar Setup
A full guitar setup improves playability, neck relief, and overall intonation. The luthier adjusts the truss rod, sets the nut slot depths and bridge saddle heights, and balances individual saddles. This service is highly recommended when changing string gauges or solving fret buzz.
Free · No obligation
Common service
Restring
A professional restring restores clarity, brightness, and tuning stability to your instrument. The luthier removes worn strings, cleans and conditions bare fretboards, and fits fresh strings properly at the posts. Ideal for players looking for a clean, reliable setup.
Free · No obligation
Common service
Headstock Repair
A headstock repair rebuilds structural strength after an accidental drop or knock. The luthier clamps the break using specialist wood glues, adding splines or reinforcement dowels where necessary. Touch‑up lacquer work is then carried out to blend and protect the repair.
Free · No obligation
Common service
Soundpost Adjustment
A soundpost adjustment alters the acoustic balance, tonal response, and projection of a violin. Using a specialist soundpost setter, the luthier carefully shifts this internal spruce post inside the body. Essential after seasonal humidity shifts, knocks, or a sudden loss of tone.
Free · No obligation
Common service
Bow Rehair
A bow rehair replaces stretched or contaminated hair to restore natural grip and friction across the strings. The craftsperson cleans the stick, inspects the frog and tip mortises, inserts fresh unbleached horsehair, and balances tension for smooth, even playing.
Free · No obligation
Common service
Floyd Rose Setup
A Floyd Rose setup balances string tension against the rear cavity tremolo springs on a floating bridge system. The pro levels the bridge baseplate, sets string action, calibrates intonation, and secures the locking nut to keep the guitar firmly in tune during heavy vibrato use.
Free · No obligation
Common service
Bass guitar setup
A bass guitar setup optimizes dynamic response and eliminates unwanted fret rattle across the fretboard. The craftsperson compensates for heavy string tension by adjusting the truss rod, bridge saddles, and pickup heights, delivering a comfortable action and consistent feel.
Free · No obligation
Common service
Bridge reglue
A bridge reglue secures an acoustic bridge that has lifted away from the soundboard under string tension. The luthier cleans off dried glue, checks the top for deformation, and reclamps the bridge using specialised soundboard clamps to avoid long‑term structural damage.
Free · No obligation
When to call a luthier
K
Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
To choose a qualified luthier, start by asking about their training, bench experience, or relevant credentials from recognized violin or guitar making schools.
✓Ask for a written quote or estimate detailing the planned work, any replacement parts, and the adhesives or finishes to be used.
✓Review previous structural repairs they have handled, particularly on instruments similar to your own.
✓Check their specific experience with your instrument family, whether modern electric guitars, vintage acoustics, or carved orchestral instruments.
✓Avoid anyone who suggests major work without examining the instrument on the bench first, or who alters original components without your explicit prior agreement.
What makes the price of a luthier
The total cost of instrument work depends on the factors listed below. The exact price will be provided on the written estimate or quote issued by the pro for your specific repair.
What affects the price
Extent and severity of structural damage
Type, age, and historical value of the instrument
Type of lacquer, finish, or polishing work required
Cost of hardware, replacement parts, and tone woods
Good to know
Price rules vary by province: the information on this page applies nationwide.
Get a call back from a luthier
For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.
Your requestFree
TradeLuthierLocationEverywhere in CanadaServiceTo chooseTimeframeYou choose
A pro in your area calls you back · free
Luthier by province
Choose your province or territory, then your town.
Ask fellow musicians for recommendations, check independent reviews, and request written estimates for the required repair. You can also describe your instrument and the issue on Kelki to receive a call back from a local craftsperson in your area.
Will a luthier near you travel to my home?+
Most lutherie work must be done in the workshop, where bench tools, specialist clamps, and controlled humidity are available. However, some professionals will travel to inspect particularly large instruments, such as double basses, or to pick up batches from local music schools and colleges.
What is the difference between a luthier and a music store clerk?+
A store clerk typically handles retail sales, advice, and basic string changes. A luthier is a skilled craftsperson trained in woodworking, acoustics, and structural repair, capable of carving nuts from bone blanks, refretting necks, and repairing soundboard cracks.
How long does a luthier keep an instrument for a setup?+
A standard setup typically takes a few days on the bench. This allows the wood to settle under string tension after truss rod and bridge adjustments. Structural repairs involving glued joints or lacquer touch‑ups will require longer curing times.
Should I provide my own strings for a guitar setup?+
You can provide your preferred gauge and brand, or purchase a set directly from the workshop. Because neck relief and bridge setup are calibrated directly to the string tension of a specific gauge, always inform the luthier of the exact strings you plan to use.
What is a violin soundpost and why does it shift?+
The soundpost is a small cylindrical piece of spruce held in place purely by friction between the top and back plates. It transmits bow vibrations throughout the body. A sudden impact, loosening all strings at once, or significant humidity changes can cause it to shift or fall.
When is a fret level, crown, and polish needed?+
Fret dressing is needed when string divots or uneven frets cause buzzing, choked bends, or intonation issues. The luthier levels the frets with a precision sanding beam, recrowns each fret wire to a rounded profile, and polishes them smooth, avoiding a premature refret.
What documentation should I ask for when handing over a valuable instrument?+
Ask for a receipt or intake sheet recording your instrument's condition, serial number, and agreed work. Request a sufficiently detailed estimate or quote covering labour and parts, followed by an itemized invoice showing the total amount to pay when you pick it up.
Need a luthier?? Get a call back.
Free · No obligation · Describe your need in a few clicks
LuthierEverywhere in CanadaLuthier request · Free · No obligationCall me back
K
Kelki AgentI connect you with pros in over 1,000 trades, in Canada.
Hello, I’m the Kelki Agent. Tell me what you need: I’ll find the right pro for you, close to home.
Messages are analyzed by an AI to understand your need, and are not stored. Privacy
Cookies
We use cookies to improve your experience and analyze site traffic. About our cookies