Skip to content

Free · No obligation · A few clicks
Your need in one click
2.2 M+companies in our trades in CanadaYour request goes to the HRV installers in your area.
$0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

HRV Installer nearby

Find an HRV Installer near you to fit, service, or upgrade your home heat recovery ventilation.

An HRV Installer handles professional hrv installation and ongoing maintenance for properties near you. These specialists size duct runs, mount the central heat recovery unit, and fit ceiling supply and exhaust diffusers. A balanced system delivers continuous fresh, filtered air throughout the property. It exhausts moisture from kitchens and bathrooms while retaining heat through an efficient heat exchanger core.

Before undertaking an installation in your area, the pro conducts a detailed site survey. This assesses structural layouts, ceiling cavities, and the ideal mechanical space for the main unit. They drill exterior penetrations, run rigid or semi‑rigid insulated ducting, and handle the electrical connections. Once installed, they commission the system using an airflow hood to balance flow rates across all rooms.

Your areaEverywhere in CanadaYour request goes to the HRV installers around you.
Your request · HRV Installer

Which service do you need?

Free · No obligation

Ventilation and heat recovery services

An installer connecting acoustic ductwork to an HRV distribution manifold in an attic
Common service

HRV/ERV system installation

Full hrv installation includes mounting the central heat recovery unit, fitting distribution manifolds, and installing ceiling air registers. The system exhausts warm, stale indoor air to temper fresh incoming outdoor air without mixing the two streams. Ideal for airtight new builds and deep retrofits to lower space heating demands.

Free · No obligation
A ventilation pro fitting an exhaust diffuser into a kitchen ceiling
Common service

Whole‑house ventilation setup

This service covers continuous mechanical exhaust ventilation designed to manage humidity levels across the house. Suited to homes needing steady background airflow without supply ducting in bedrooms. The installer runs ducting from bathrooms and utility areas to an exterior hood, ensuring adequate background fresh air.

Free · No obligation
A technician checking airflow rates using a flow hood during an annual service
Common service

Annual ventilation maintenance

Annual maintenance covers inspecting the heat recovery core, cleaning fan impellers, and verifying balanced airflow rates. Regular maintenance keeps ductwork clean, prevents motor noise, and maintains thermal efficiency. The pro also checks condensate drain lines to prevent blockages and leaks.

Free · No obligation
A pro sliding a clean air filter into a wall-mounted HRV unit
Common service

HRV filter replacement

Routine replacement covers particulate and pollen filters inside the main heat recovery ventilator. Renewing blocked filters preserves indoor air quality in living spaces and protects the heat exchanger from dust build‑up. The technician fits genuine, correctly rated replacement filter media.

Free · No obligation
A technician replacing anti-vibration rubber mounts on a noisy exhaust fan
Common service

Ventilation motor repair

This work targets excessive vibration, rumbling motor bearings, or unusual sounds coming from the ventilation unit. The pro inspects unit mounting brackets, cleans accumulated dust from fan impellers, and installs new anti‑vibration mounts or replacement motors to restore quiet operation.

Free · No obligation
A technician testing the electrical terminals of a ventilation unit with a multimeter
Common service

Ventilation troubleshooting

Diagnostic and repair work identifies why a heat recovery ventilator has stopped running or lost airflow power. The pro tests power supplies, motor run capacitors, temperature sensors, and circuit boards. Defective components are replaced promptly to restore moisture removal and prevent mould or dampness.

Free · No obligation
An installer running low-profile ductwork inside a ceiling cavity during a retrofit
Common service

Retrofit ventilation installation

Retrofit installation integrates mechanical ventilation into existing homes with minimal disruption to interior finishes. The specialist routes compact ductwork through attics, bulkheads, or dropped ceiling spaces. They recommend compact or attic‑mounted units suited to existing floor plans.

Free · No obligation
A pro fitting an exhaust air grille to the ceiling of a bathroom
Common service

Bathroom ventilation

Dedicated bathroom ventilation involves installing an exhaust fan or linking the room to a central ducting system. It eliminates lingering humidity, condensation, and black mould growth on walls and ceilings. The pro sets appropriate flow rates based on bathroom size and local building codes.

Free · No obligation
A ventilation specialist securing insulated ducting to a central heat recovery ventilator

When to call an HRV Installer

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose an HRV Installer

Request a clear written estimate detailing the unit manufacturer, sensible recovery efficiency (SRE), ducting type, and register layout.

  • Prefer rigid or semi‑rigid radial ductwork over flexible ducting that can sag or collect dust.
  • Check that the pro holds valid commercial general liability insurance covering mechanical and ductwork installations.
  • Look for proven experience with residential heat recovery ventilators and proper system commissioning credentials.
  • Ask how they calculate household air exchange rates and balance supply and exhaust flows.
  • Avoid contractors who provide quotes without checking attic access, joist spaces, or ceiling layouts.

What makes the price of an HRV Installer

The total price depends primarily on the factors listed below. The final amount payable is set out in the detailed written estimate provided by your pro for your specific property.

What affects the price

  • Chosen ventilation system type (continuous extract vs heat recovery)
  • Length, material, and accessibility of the ducting network
  • Property layout, whether a new build project or an existing retrofit
  • Efficiency rating and specific features of the heat recovery unit

Good to know

  • Price rules vary by province: the information on this page applies nationwide.

Get a call back from an HRV Installer

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeHRV InstallerLocationEverywhere in CanadaServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Your most common questions

How can I find a reliable HRV installer near you?

To find a reliable pro near you, describe your home and current ventilation needs on Kelki. A local specialist will call you back to arrange a site survey. This allows them to inspect duct paths and ceiling spaces before providing a detailed estimate.

Do HRV specialists based near you cover nearby areas?

Yes, pros based near you typically cover neighbouring towns and wider districts across the region. Their usual travel area can be confirmed during your initial conversation, and any travel fees will be set out clearly in their written estimate.

What is the difference between an exhaust‑only fan and an HRV system?

Exhaust‑only fans simply vent stale, moist air outside, relying on air leaks or passive wall grilles to pull outdoor air inside. An HRV exhausts stale indoor air while continuously delivering filtered outdoor air to living areas, transferring heat between the two streams without mixing them.

What paperwork should I ask for when booking an installation?

Ask for proof of commercial general liability insurance, an itemized written estimate outlining equipment models, and ducting specifications. Once completed, make sure you receive a balancing report recording measured airflow rates for each room.

How long does an HRV installation take?

Installing a complete HRV system in a typical home usually takes between two and four days. Project timelines depend on access to attics or joist bays, the number of bathrooms and bedrooms, and whether the job is a new build or a retrofit.

How often does a home HRV system need maintenance?

A professional service is recommended every one to two years to clean the core, check fan motors, and clear condensate drainage lines. In addition, intake and extract air filters should be checked and replaced once or twice a year.

What factors influence the total cost of installation?

Costs depend on the size and efficiency rating of the HRV unit, the ducting materials selected, and the overall complexity of the layout. Restricted attic access, cutting through exterior walls, or framing bulkheads in existing rooms will also affect labour requirements.

Can an HRV be installed in any type of house?

An HRV needs sufficient space for the central unit, acoustic silencers, and insulated ducting runs. To gain the maximum energy‑saving benefits of heat recovery, the home should also have reasonable airtightness, which may involve weatherstripping older properties first.

Need an HRV Installer??
Get a call back.

Free · No obligation · Describe your need in a few clicks
HRV InstallerEverywhere in CanadaHRV request · Free · No obligationCall me back