Skip to content

Free · No obligation · A few clicks
Your need in one click
10 M+companies in our trades in FranceYour request goes to the building services engineers in your area.
€0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.

Building Services Engineer nearby

A building services engineer to design and size your heating, ventilation and plumbing systems.

A building services engineer works in construction to design building services and technical networks. They handle heating, ventilation, air conditioning (HVAC) and domestic plumbing. Their role involves calculating the energy requirements of new builds or existing properties. They specify the required plant outputs and produce layout drawings for pipework and ducting routes. Their calculations ensure compliance with the thermal and environmental regulations in force across France.

The process begins with analysing architectural plans and the project brief. The team carries out regulatory compliance calculations, then accurately sizes each piece of technical equipment. They produce calculation reports, schematic diagrams and written specifications to invite tenders from installation contractors. During construction, they can also inspect the compliance of on‑site installations before handover and commissioning.

Your areaEverywhere in FranceYour request goes to the building services engineers around you.
Your request · Building Services Engineer

Which service do you need?

Free · No obligation

Building services engineering services

An engineer adjusting the thermal modelling software for a new build on her computer screen
Common service

Building Regulations Part L Compliance

This service verifies the compliance of a new build with mandatory French environmental and thermal standards (RE2020). The engineering consultancy models the property to calculate regulatory indices such as Bbio, Cep and carbon impact. They generate the official certificates required for planning permission applications and completion notices.

Free · No obligation
An energy auditor inspecting insulated pipework in a communal boiler room using a portable thermal camera
Common service

Energy Audit

An energy audit provides a comprehensive assessment of energy usage in commercial premises or co‑owned apartment buildings (copropriétés). The professional assesses the building envelope, existing heating plant and ventilation. They propose a prioritised roadmap of improvement works to cut energy bills, helping owners plan their refurbishment budget.

Free · No obligation
An engineer sizing pipe diameters on a central heating schematic drawing
Common service

Heating System Design

Heating system design establishes the exact heat generator capacity and pipework sizing required. The engineer calculates room‑by‑room heat loss according to insulation levels and thermal orientation. They size heat emitters such as radiators or underfloor heating alongside circulation pumps, avoiding undersized heating and energy waste.

Free · No obligation
A CAD technician modelling ventilation ductwork and plumbing networks on a CAD workstation
Common service

Detailed Design Drawings

Producing detailed design drawings provides contractors with accurate technical documents for installing pipework and ductwork on site. The technician models ventilation runs, domestic supply pipes and HVAC terminals in 3D. They check for spatial clashes with the structure and set out builders' work holes, sections and finished levels.

Free · No obligation
A building services engineer inspecting suspended air conditioning pipework on a commercial job site
Common service

MEP Project Management

MEP project management provides technical oversight during the installation of HVAC and plumbing packages. The specialist reviews contractor workshop drawings, attends site meetings and inspects equipment installation. They assist the client during pre‑handover inspections and record any technical defects on the snagging list.

Free · No obligation
An engineer calculating domestic hot water storage capacities and return loops at her desk
Common service

Domestic Hot Water Sizing

This study sizes domestic hot water production plant and distribution pipework. The engineer evaluates daily draw‑off profiles based on residential or commercial usage. They calculate storage cylinder capacity, secondary return circulation loops and distribution pipe diameters to mitigate bacterial risks such as legionella.

Free · No obligation
A consultant presenting dynamic thermal simulation results to a client in a meeting room
Common service

Energy Performance Analysis

An energy performance analysis evaluates heat transfers throughout a property prior to major refurbishment. The consultant runs dynamic thermal simulations (STD) to forecast summer indoor comfort and annual energy consumption. This study guides the choice of insulation materials and renewable energy plant best suited to the target performance.

Free · No obligation
A consultant drafting and annotating technical specifications for heating, ventilation and plumbing tender documents
Common service

MEP Specifications

Preparing technical MEP specifications sets out the contractual requirements for heating, ventilation and plumbing tenders. The engineer writes detailed descriptions of expected plant, performance criteria and applicable standards. This contractual document enables fair comparison of installation quotes during competitive tendering.

Free · No obligation
A building services engineer reviewing HVAC layout drawings with a scale ruler in front of computer monitors

When to call a building services engineer

Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
GOOD HABITS ✦ CHOOSE WITH CONFIDENCE ✦

How to choose a building services engineer

To choose a building services engineer, review their past projects on properties similar to yours in size and intended use.

  • Ask for a copy of their current professional indemnity and ten‑year structural liability insurance certificates.
  • Ensure their fee proposal specifies all expected deliverables clearly, such as calculation reports, software file formats and scheduled progress meetings.
  • Ask about the thermal calculation methods and approved software they use to confirm compliance with current French standards.
  • Avoid vague quotes that fail to separate design calculations from on‑site technical supervision.
  • A dependable professional will ask detailed questions about the building fabric and project programme before preparing their quote.

What makes the price of a building services engineer

The cost depends primarily on the factors listed below. The exact price is the one quoted by the professional on their written quote, tailored to your specific project.

What affects the price

  • Total floor area and intended building use
  • Scope of work, from design calculations only to on‑site project management
  • Complexity of mechanical plant and distribution pipework
  • Requirements for 3D BIM modelling

Get a call back from a building services engineer

For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.

Your requestFree
TradeBuilding Services EngineerLocationEverywhere in FranceServiceTo chooseTimeframeYou choose
A pro in your area
calls you back · free

Your most common questions

What documents are needed to start an MEP engineering study?

The engineering consultancy requires up‑to‑date architectural plans in digital format, including sections, elevations and floor layouts. They also need wall build‑up specifications, technical data sheets for proposed insulation and any preliminary fire safety reports. For refurbishment projects, past energy bills and existing mechanical layouts are also needed.

What is the difference between a regulatory thermal study and an energy audit?

A regulatory thermal study applies mainly to new builds to demonstrate compliance with mandatory legal standards such as RE2020. An energy audit applies to existing buildings. It assesses actual energy consumption and highlights weaknesses in insulation or heating. The audit then delivers a phased programme of refurbishment works.

Why have heating pipework and systems sized by a professional?

Accurate sizing prevents issues with oversized or underperforming heating systems. Inappropriate pipe diameters or undersized boilers lead to inflated installation costs, premature plant wear and hydraulic pipe noise. Rigorous heat loss calculations ensure a consistent indoor temperature in every room without wasting energy.

What insurance must a building services engineer hold?

The professional must carry professional indemnity insurance covering technical and intellectual consultancy. For standalone calculations or diagnostics, this cover is sufficient. However, if their brief includes design coordination or site supervision, ten‑year liability insurance is necessary. Always request these insurance certificates before commissioning work.

Does a building services engineer visit the construction site?

Site visits depend on the scope of work agreed in the contract. For standalone calculation sheets or regulatory compliance studies, the work is carried out entirely from drawings. In contrast, for a retrofit audit or technical project management mission, the engineer carries out on‑site visits to survey existing plant, inspect installation quality and assist with practical completion.

What is included in an MEP technical specification (CCTP)?

The technical specification document outlines all technical requirements for installation contractors. It details the technical specifications for boilers, heat pumps, pipework materials and ventilation units. It also sets out workmanship standards, connection criteria, testing requirements and handover operation manuals.

What is a builders' work drawing for building services?

A builders' work drawing shows the structural contractors where openings are required in concrete slabs, shear walls and beams. It gives the exact dimensions and positions of sleeves and builder's holes to run soil pipes, ducts and water supplies. Setting this out beforehand avoids costly and damaging core drilling after the concrete is poured.

What factors determine the cost of a building services engineering mission?

The fee proposal depends on the building's floor area, its intended use and the required level of detail. A mission limited to basic regulatory compliance takes less time than a full engineering package with site supervision. Complex technical systems or high environmental targets also increase the engineering hours required. To find the right specialist, describe your requirements on Kelki to receive a call back from a professional in your area.

Need a building services engineer??
Get a call back.

Free · No obligation · Describe your need in a few clicks
Building Services EngineerEverywhere in FranceBuilding services engineer request · Free · No obligationCall me back