10 M+companies in our trades in FranceYour request goes to the BMS integrators in your area.
€0for your requestFree, no obligation, confirmed by you.
30 sto make your requestService, timeframe, town: a few clicks, and a professional calls you back.
BMS Integrator nearby
A BMS Integrator to control your technical equipment and comply with the BACS decree in France.
Looking for professional bms contractors? A BMS Integrator connects the technical equipment of a commercial or industrial building to a central system. They link heating, ventilation, air conditioning (HVAC), and lighting to programmable logic controllers. This specialist helps property managers meet statutory obligations under France's BACS decree (décret BACS) while configuring data collection to monitor real energy consumption.
The work begins with an analysis of electrical drawings and existing on‑site networks. The pro installs controllers, runs communication fieldbuses, and programmes heating curves. They then configure the supervisory graphical interface on the central monitoring station. Finally, they carry out commissioning tests alongside the building's facilities management team.
Your areaEverywhere in FranceYour request goes to the BMS integrators around you.
Your request · BMS Integrator
Which service do you need?
Free · No obligation
Building management system services
Common service
Energy Audit
The BMS audit evaluates the condition of existing control loops and communication networks across your buildings. The pro inventories current controllers, sensors, and field protocols. This assessment identifies hardware failures and missing instrumentation before modernising your systems.
Free · No obligation
Common service
BACS Decree Compliance Study
This study assesses your technical systems against France's BACS decree (décret BACS) standards. The integrator reviews regulation classes, system interoperability, and consumption logging capabilities. They provide a gap analysis detailing the required upgrades to meet legal standards.
Free · No obligation
Common service
BMS Controller Installation
The pro installs programmable logic controllers inside electrical enclosures in plant rooms and air handling units. They wire inputs and outputs to sensors and actuators. This service covers new builds as well as retrofits for obsolete controllers.
Free · No obligation
Common service
Heating controller commissioning
This service covers heating parameter adjustments and testing motorised valves. The integrator configures temperature setpoints to match actual building occupancy schedules. You typically book this commissioning after boiler replacements or heating substation refurbishments.
Free · No obligation
Common service
BMS Sequence Programming
Sequence programming automates equipment behaviour according to schedules and outdoor weather. The technician codes start‑up logic, night setbacks, and bank holiday shutdowns. This service helps managers cut wasted energy during unoccupied periods.
Free · No obligation
Common service
BMS Graphics Design
The integrator creates graphic views showing floor plans and hydraulic schematics. They embed technical alarms, trend logs, and energy dashboards. This supervisory interface lets building operators monitor all installations remotely from a screen.
Free · No obligation
Common service
BMS Maintenance Contract
Preventive maintenance includes backing up logic programmes, checking controller backup batteries, and monitoring bus communications. The pro tests safety interlocks and alarm triggers. This periodic service prevents setpoint drift and major heating breakdowns.
Free · No obligation
Common service
HVAC Control Repair
This service resolves communication dropouts between devices, locked controllers, or faulty control valves. The integrator pinpoints hardware or software faults on site or remotely. Control repair restores temperature regulation during plant shutdowns or overheating.
Free · No obligation
When to call a BMS Integrator
K
Is this your situation? A professional in your area calls you back to discuss it.Free · No obligation
Demand a detailed written quote breaking down hardware, field wiring, programming, and commissioning.
✓Check for valid professional indemnity insurance covering building automation and engineering.
✓Ask the pro which open protocols they support, such as BACnet, Modbus, or KNX, to avoid proprietary lock‑in.
✓Request recent project references for commercial properties similar to yours.
✓Enquire about full access to programme source code and technical documentation for the installation.
✓Beware of contractors who refuse to release source files or supervisory software licences.
✓You must remain free to award future maintenance or operations to another contractor.
What makes the price of a BMS Integrator
The price depends primarily on the factors below. The exact price is set out on the detailed quote provided by the pro for your specific requirements.
What affects the price
Number of physical I/O and network communication points
Floor area and architectural complexity of the premises
Underlying protocols and age of existing building services
Level of detail and bespoke graphics required on the front end
Get called back by a BMS Integrator
For each service and each town, Kelki explains the essentials: the services, when to call a pro and pointers to choose well. With « Call me back », you describe your need in a few clicks: your request goes to a professional of the trade in your area, and you then deal with them directly.
Your requestFree
TradeBMS IntegratorLocationEverywhere in FranceServiceTo chooseTimeframeYou choose
A pro in your area calls you back · free
Your most common questions
What is the BACS decree for commercial buildings in France?+
France's BACS decree (décret BACS) requires building automation and control systems in non‑residential commercial buildings. It applies to facilities with heating or air conditioning systems exceeding 70 kW nominal output: mandatory since 1 January 2025 above 290 kW, and by 1 January 2030 above 70 kW. The system must log consumption data and adjust controls automatically.
How does a BMS integrator carry out their work?+
The integrator first analyses technical schematics and on‑site electrical distribution boards. They mount controllers, terminate communication buses, and upload programmes. Every command is tested on physical equipment before connecting to the supervisory PC. Finally, they train your on‑site team on basic daily operations.
Which documents should you prepare before the contractor arrives?+
Gather electrical schematics for control panels, ventilation and hydraulic layout drawings, and the schedule of technical equipment. Ensure access to plant rooms and prepare login credentials for any control software or servers already in place.
Which communication protocols are standard in building automation?+
Integrators mainly use open protocols such as BACnet, Modbus, KNX, or M‑Bus. These standards allow devices from different manufacturers to communicate smoothly. Using open protocols protects you from being locked into a single supplier for future extensions.
What credentials should you check when selecting a professional?+
Ask for current professional indemnity and ten‑year structural liability (garantie décennale) insurance certificates. You can also ask for manufacturer training credentials for the specified controllers. Get written confirmation that application source code and software licences will be handed over at project sign‑off.
Why does building size impact the project cost?+
Costs scale directly with the number of physical and network points, such as sensors, energy meters, and control valves. Larger floor areas require longer cable runs and extra control panels. In addition, point‑to‑point testing and bespoke logic take longer on extensive sites.
Does a BMS integrator travel to all your locations?+
The specialist travels to your site for audits, physical wiring, and panel commissioning. Once established, they can handle routine maintenance, schedule adjustments, and software troubleshooting remotely via a secure connection to your local IT network.
What is the difference between centralised control (GTC) and full BMS (GTB)?+
Centralised technical control (GTC) manages a single building trade, typically heating or lighting alone. Building management systems (GTB) oversee and coordinate all technical trades across a site via a unified interface, including access security, ventilation, air conditioning, and energy metering.
Need a BMS Integrator?? Get a call back.
Free · No obligation · Describe your need in a few clicks
BMS IntegratorEverywhere in FranceBMS Integrator request · Free · No obligationCall me back
K
Kelki AgentI connect you with pros in over 1,000 trades, in France.
Hello, I’m the Kelki Agent. Tell me what you need: I’ll find the right pro for you, close to home.
Messages are analysed by an AI to understand your need, and are not stored. Privacy
Cookies
We use cookies to improve your experience and analyse site traffic. About our cookies